.png)
aecfilterparts
เบอร์โทร : 02-171-5090 แฟกซ์ : 02-171-5089
เบอร์โทร : 02-171-5090 แฟกซ์ : 02-171-5089
Your shopping cart
ไม่มีสินค้าในตะกร้าของคุณ
optibelt ALPHA LINEAR SPECIAL
เพิ่มเมื่อ: 2016-09-15 14:46:40.0
แก้ไขล่าสุด: 2016-09-16 16:37:25.0
เบอร์โทรติดต่อ: เบอร์โทร : 02-171-5090 แฟกซ์ : 02-171-5089 
อีเมลล์: aecfilterparts@gmail.com
รายละเอียด:
with mechanical belt joints
with mechanical belt joints
- ProfileT10; AT10 for widths of 25, 32 and 50 mm H for widths of 25.4, 38.1 and 50.8 mm
- DimensionsFurther profiles, intermediate widths and widths exceeding 50 mm are available on request.
- DetailThe ZS / ZSi timing belt joint
The timing belt joint ZS / ZSi is designed to allow repeated detaching and joining of timing belts in the plant itself.
Versions are available for the AT10, T10 and H profiles.
Both versions are offered in stainless-steel as standard for the AT10 and H profiles. For the T10 profile, the tooth side inserts are made of brass
The PINJOIN timing belt joint The PINJOIN timing belt joint is designed for permanently joining belts, one time only, in the plant. Version available for profile AT10.
The connection is made by means of stainless-steel threaded pins that fit into laterally drilled holes running longitudinally through the tooth.
- AdvantagesAdvantages
- Connections made of stainless steel are suitable for use in the food and pharmaceutical industries
- Quick and easy installation on site, in the plant
- Coated belts can also be joined using PinJoin
Properties- Despite the open finger-spliced joint, these belts offer approx. 50% of the performance of endlessly welded timing belts
ไม่ระบุราคา
Profile
T10; AT10 for widths of 25, 32 and 50 mm H for widths of 25.4, 38.1 and 50.8 mm
Dimensions
Further profiles,
intermediate widths and widths exceeding 50 mm are available on request.
Detail
The ZS / ZSi timing belt joint
The timing belt joint ZS / ZSi is designed to allow repeated detaching and joining of timing belts in the plant itself.
Versions are available for the AT10, T10 and H profiles.
Both versions are offered in stainless-steel as standard for the AT10 and H profiles. For the T10 profile, the tooth side inserts are made of brass
The PINJOIN timing belt joint The PINJOIN timing belt joint is designed for permanently joining belts, one time only, in the plant. Version available for profile AT10.
The connection is made by means of stainless-steel threaded pins that fit into laterally drilled holes running longitudinally through the tooth.
Versions are available for the AT10, T10 and H profiles.
Both versions are offered in stainless-steel as standard for the AT10 and H profiles. For the T10 profile, the tooth side inserts are made of brass
The PINJOIN timing belt joint The PINJOIN timing belt joint is designed for permanently joining belts, one time only, in the plant. Version available for profile AT10.
The connection is made by means of stainless-steel threaded pins that fit into laterally drilled holes running longitudinally through the tooth.
Advantages
Advantages
Connections made of stainless steel are suitable for use in the food and pharmaceutical industries
Quick and easy installation on site, in the plant
Coated belts can also be joined using PinJoin
Properties
Despite the open finger-spliced joint, these belts offer approx. 50% of the performance of endlessly welded timing belts
สินค้าที่เกี่ยวข้อง
|
