DimensionsMetric: 120 to 2,250 mm
Imperial: 2.4 to 60 inches
DetailThe optibelt ALPHA TORQUE is made from abrasion-resistant polyurethane with a hardness of 86 Shore A. Good resistance to oil plus a certain resistance to acids and alkaline solutions are standard features of this polyurethane.
The optibelt ALPHA TORQUE can be reinforced with tension cords made of steel, highly flexible steel, stainless steel, aramid, polyester or Vectran to suite a wide range of applications.
AdvantagesAdvantages
Good oil and chemical resistance
Large selection of tensile reinforcement materials
Quick availability
Properties
Usable sleeve width: up to 380 mm
Unlimited choice of colours on request
Variable position of the tolerance zone, for fixed centre distances, for example
AdvantagesAdvantages
Good oil and chemical resistance
Large selection of tensile reinforcement materials
Quick availability
Properties
Usable sleeve width: up to 380 mm
Unlimited choice of colours on request
Variable position of the tolerance zone, for fixed centre distances, for example
T 2.5; T5; T10 DT 2.5; DT5; DT10 AT5; AT10 MXL; XL; L
Dimensions
Metric: 120 to 2,250 mm
Imperial: 2.4 to 60 inches
Detail
The optibelt ALPHA TORQUE is made from abrasion-resistant polyurethane with a hardness of 86 Shore A. Good resistance to oil plus a certain resistance to acids and alkaline solutions are standard features of this polyurethane.
The optibelt ALPHA TORQUE can be reinforced with tension cords made of steel, highly flexible steel, stainless steel, aramid, polyester or Vectran to suite a wide range of applications.
Advantages
Advantages
Good oil and chemical resistance
Large selection of tensile reinforcement materials
Quick availability
Properties
Usable sleeve width: up to 380 mm
Unlimited choice of colours on request
Variable position of the tolerance zone, for fixed centre distances, for example
Advantages
Advantages
Good oil and chemical resistance
Large selection of tensile reinforcement materials
Quick availability
Properties
Usable sleeve width: up to 380 mm
Unlimited choice of colours on request
Variable position of the tolerance zone, for fixed centre distances, for example